![]() |
Quote:
Wow, that's a really nice guitar. How much did you pay? And what's your opinion on the mics? |
My effects setup (or one of them for my band Bare Flames):
![]() mxr phase 90 (cap modded) ProCo Rat older reissue from 80's EH Russian Bigmuff Reissue (switchable to cap mod to sound like the older vintage army green) EH Deluxe Memory Man Digitech 2 second delay/loop |
Quote:
|
Quote:
you should have a good sound eh? fun for sure! have you ever tried to put the analog delay before the dist? could be interesting....sounds rad! about the cap mod I dont know exactly cause I havent the phase90 but the guy that plays with me did some mod on his old phase90 to adjust some specific things like the clack when turned on/off with a resistor on the switch etc etc dont know exactly...... |
ah guys I forgot to post a link to a mini website I made about some effects.....if could be useful for somebody............http://www.sonicurbs.com/effects/
it's quite technical and fetish yeah |
I see those digitech PDS delays on so many boards even though they don't make them anymore. They must be awesome.
|
yes they sound very dark/warm to be digital! probably even cause their low resolution that in the mid 80s was regular. then they are up to 2sec (and more) and I dont think in the mid 80 there were so much 2sec digital delay guitar pedals!
I'm sure they were used even for techno live music till the early 90s. cause they have warm bass freq and thay allow just a short loop. |
Quote:
On the MXR Phase 90, first off i need to correct myself as i've done this mod a year ago... i actually have the Block Logo new reissue Phase 90 (whom i bought from Naomi on this board...), and its a resistor modification (not a capacitor) removing or disconnecting the R28 feedback resistor (24k). It makes it sound abit more like the older original "script model" (but still not the same!!!) by eliminating the distorted mid-boost when engaging the effect. It is easy to do, the hardest part is removing the board from the unit compartment, the resistor is in the upper corner and should be marked (as R28 on the board), making it easier to identify... just clip one of the leads to the resistor with tiny scissors, or you can get creative and add a small switch to alternate from the original tone to the modded one. I've just learned of several more modifications that can be done to the "Block Logo" models where capicators may be removed or interchanged w/ different values to filter noise, or give unity gain when the effect is engaged (because there is a slight yet noticable boost), and also the trimpot can be adjusted, here is the link: http://diy.erikhansen.net/phase90.htm w/ the mod this is a great phaser i think, as a factory unit i thought it was ok... However i must say that I had TWO vintage late 60's early 70's Maestro phase shifters (a PS-1A and PS-1B) both were killer sounding units the best phase sound i ever heard but they were huge dinosaurs to have in my setup and i didn't have the footswitch that would go with these either making it a complex issue to activate the toggles with my feet, so i sold them, for some decent money. |
Quote:
I actually did try to put the Memory Man before the Muff and Rat, I use the Memory Man as a subtle effect, and not very often to expand the sound of my guitar during certain song sections so to me it sounded better after those distortion/fuzz units. I use the Memory Man alot more in other projects that are more psych/noisey/experimental. |
Quote:
I love the Digitech PDS-1002! for all of those reasons! and i suppose thats why Lee still uses these units... I actually had a PDS-2000 which was also made in the 80's and it had an unprecedented 8 second delay/loop ability (along with switching to 2 seconds, and 500 ms? i think) i bought it off ebay for like $150 about 5 years ago. Unfortunately the unit was giving out, the capacitors were shot and soem other components, the repeat was decaying in a very bad way so the sound was not any good and i had to part ways with it. |
Run your electric shaver over the guitar pickups. Sounds awesome.
|
Quote:
|
Quote:
|
![]() It is here. I switched the order though, frequency analyzer is now in the chain before the polyphase, as it sounds better. |
hello there fellow shortscale boarder!
|
Teehee.
|
I'm getting a little bored of shortscale.org, a lot of the nice guys have slowly turned into dicks.
|
i joined a week ago. sometimes theres these really dumbass funny threads.
|
That's true, and there is a lot of good info to be had. Hurb, Aen, and Sloan are all pretty cool guys.
|
Bump.
By decree of the Mighty Savage Clone- all gear discussion will go in here! |
All times are GMT -5. The time now is 06:36 PM. |
Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
All content ©2006 Sonic Youth