|
instructions ofr making a microphone with a 6 inch or bigger or smaller diaphragm....
what you need -
car speaker 2 - 8 ohm
canare two core or star quad cable
neutrik tip sleeve jack
.....
strip an inch from the sleeve around the cable exposing the wires - should be one blue one white plus a shield. get rid of the paper and string.
don't forget the boot
solder the white wire to the tip part of the jack
solder the blue and the shield to the sleeve
then at the other end solder the white to the positive pole and the blue to the negative pole.
plug it all into your fx and your amp and you will have hours of glorious feedback stimulation with your new microphone.......
|