03.07.2007, 06:03 PM | #1 |
children of satan
Join Date: Sep 2006
Location: Victoria, B.C.
Posts: 260
|
I want to make some drum triggers, but first I need to get a module. Does anyone play with electric drums at all, or know of any decent modules?
__________________
Do you believe in raptors? |
|QUOTE AND REPLY| |
03.07.2007, 06:37 PM | #2 |
invito al cielo
Join Date: Mar 2006
Location: Australia
Posts: 3,358
|
use a laptop with sampler, you can get yamaha triggers that are around $35au each DT10 or DT20 but then you need a converter such as a roland tmc6
|
|QUOTE AND REPLY| |
03.07.2007, 07:19 PM | #3 |
children of satan
Join Date: Sep 2006
Location: Victoria, B.C.
Posts: 260
|
Yeah, I'm sorta looking to not spend laptop range prices
I don't really want a computer to bog down my kit either. But I already have a roland TR-626, so maybe I will just build a converter. I already found a wicked site with plans and I already have most of the parts so maybe I will go with that Thanks for the info. Here is the link to the convertor if anyone else is interested: http://www.edrum.info/
__________________
Do you believe in raptors? |
|QUOTE AND REPLY| |
03.07.2007, 07:38 PM | #4 |
invito al cielo
Join Date: Mar 2006
Location: Australia
Posts: 3,358
|
if you have the 626 then you just need to buy the triggers
|
|QUOTE AND REPLY| |
03.07.2007, 08:30 PM | #5 |
children of satan
Join Date: Sep 2006
Location: Victoria, B.C.
Posts: 260
|
The TR-626 has a bunch of seperate outputs, but I don't think they can be used as trigger inputs. Do you think they can? Maybe there's something in one of the menus! I just got the manual for it off roland's site
__________________
Do you believe in raptors? |
|QUOTE AND REPLY| |
03.07.2007, 09:57 PM | #6 |
invito al cielo
Join Date: Mar 2006
Location: Australia
Posts: 3,358
|
what r the inputs??? with equipment like that sometimes the IOs are from the same 1/4 inch jack plug. This is usually done with a tip/ring/sleeve jack rather than say a tip/sleeve like an instrument cable. With these you are able to have the signal travel both ways down the cable with the correct wiring configuration. An example would be plugging an outboard compressor into the insert of a mixing console (in an unbalanced config) the tip of the 1/4 jack (depending on the console) sends the signal to the compressor input, the compressor output then returns the signal down the ring part of the 1/14 inch jack.
|
|QUOTE AND REPLY| |
03.08.2007, 12:02 AM | #7 |
children of satan
Join Date: Sep 2006
Location: Victoria, B.C.
Posts: 260
|
I looked through the manual and it seems unlikely that it'll work. I mean, the sounds aren't even velocity sensitive or anything. It says the outputs are just outputs for sound by sound access to effects.
Here is a picture of the back, for curiosity's sake. http://img.photobucket.com/albums/v493/zedius/back.jpg From left to right: On/off, power supply jack, R/Mono, L, phones, a whole slew of outputs, midi in and out, below is pedal input, trigger out (triggers on rimshot), and tape backup shit.
__________________
Do you believe in raptors? |
|QUOTE AND REPLY| |
03.08.2007, 01:39 AM | #8 |
invito al cielo
Join Date: Mar 2006
Location: Baltimore
Posts: 7,808
|
When I get my $6000 plus dollar electric drumset it's fucking over.....you've been warned.
Good luck with that, zedius.
__________________
Confusion is next and next after that is the Truth. |
|QUOTE AND REPLY| |
03.08.2007, 02:18 AM | #9 |
invito al cielo
Join Date: Jun 2006
Location: Sydney
Posts: 6,157
|
Ask the guys who are responsible for the Whitey Album.
|
|QUOTE AND REPLY| |